Connecting two Pi's via Ethernet - Raspberry Pi Forums
hi,
have project 2 pi's connected via standard (non-crossover) ethernet cable 1 acts controller , other logger. having trouble getting them talk more fact don't have monitor/keyboard (well hdmi monitor) , using ssh configure them lose when try direct connection.
set have on 1 is:
iface eth0 inet static
address 192.168.0.30
netmask 255.255.255.0
, on other:
iface eth0 inet static
address 192.168.0.40
netmask 255.255.255.0
when connected wired network can ssh both of them , can ping each other, when connect them can't see each other has routing issue. have looked , there conflicting advice need gateway , other settings need (ip tables??).
hoping can give me quick pointer in right direction, 1 of pi's has gps attached think gets in way of normal tty session seem going in circles sorting out!
many thanks,
scott.
have project 2 pi's connected via standard (non-crossover) ethernet cable 1 acts controller , other logger. having trouble getting them talk more fact don't have monitor/keyboard (well hdmi monitor) , using ssh configure them lose when try direct connection.
set have on 1 is:
iface eth0 inet static
address 192.168.0.30
netmask 255.255.255.0
, on other:
iface eth0 inet static
address 192.168.0.40
netmask 255.255.255.0
when connected wired network can ssh both of them , can ping each other, when connect them can't see each other has routing issue. have looked , there conflicting advice need gateway , other settings need (ip tables??).
hoping can give me quick pointer in right direction, 1 of pi's has gps attached think gets in way of normal tty session seem going in circles sorting out!
many thanks,
scott.
is 192.168.0.x pc's network? if give pi's own network such 192.168.1.x
raspberrypi
Comments
Post a Comment