Recovering my Yuns (4)

playing around websockets , using winscp etc transfer files onto sd card plus web files etc, somehow locked yun. serial port probs, not enough flash memory, serial port on 0,1, no sign of tx data. sd card issues. thought maybe scope had caused issues. shouldn't have done... quite nice portable colour fluke, isolated etc.

try may, limited linux knowledge no go. did following ... , 4 yuns , running. may have been in sketch, using no problems.
i put here maybe might @ point was. ( got find rest of hair, , recover day lost!)

power ..... wait wifi on.
hold wlan reset @ least 40 secs  , wait .

use winscp (or whatever or use pc) load latest wrt onto sd.  winscp @ root@ 192.168.240.1
log onto 192.168.240.1 , use panel reset new wrt.

wait yun wifi on. (may have power down/up, did didn't)
upload blank sketch via serial.
log onto 192.168.240.1. , use panel set ap point internet access.
log onto new ap.
load yundiscspace expander sketch , load yun via serial.
follow intructions on serial monitor. use 1g sector.
wait that.

back winscp opkg update , install required. ( in case node, node-ws, node-serailport)

might in cases, , @ least try:)

another issue arose 8gb sd cards , discexpander.
using windows 7.... format fat32... put arduino/www folders using pc, , no go in partitioning.   err fat32 etc.
drops sd 1gb , doesn't work.

the way ( 2 of them) work format in pc using sdformatter, using winscp create folders there.
discexpander works fine.
remember re install packages.

Arduino Forum > Products > Arduino Yún (Moderator: fabioc84) > Recovering my Yuns (4)

arduino