WiFi has an issue with "ioctl" (beyond wifi sticky) - Raspberry Pi Forums


hi everyone,

edit: should have mentioned this, running latest raspbian provided via noobs, repositories , packages have been updated.

first, went through every step sticky post: viewtopic.php?f=28&t=44044. happened go through steps prior reading went through them again measure before posted.

basically, seems result getting when trying bring wifi module:
~ $ sudo ifdown wlan0 && sudo ifup wlan0
ioctl[siocsiwap]: operation not permitted
ioctl[siocsiwencodeext]: invalid argument
ioctl[siocsiwencodeext]: invalid argument
here /etc/network/interfaces:

code: select all

auto lo iface lo inet loopback  auto eth0 allow-hotplug eth0 iface eth0 inet manual  auto wlan0 allow-hotplug wlan0 iface wlan0 inet manual wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf  iface default inet static address 192.168.0.7 netmask 255.255.255.0 gateway 192.168.0.1  
, wpa supplicant config (this automatically written wpa_gui; tried doing part myself , resorted wpa_gui thinking doing wrong):

code: select all

ctrl_interface=dir=/var/run/wpa_supplicant group=netdev update_config=1  network={         ssid="two roads"         psk="my_pass_code"         proto=rsn         key_mgmt=wpa-psk         pairwise=tkip         auth_alg=open } 
lsusb:

code: select all

bus 001 device 002: id 0424:9512 standard microsystems corp.  bus 001 device 001: id 1d6b:0002 linux foundation 2.0 root hub bus 001 device 003: id 0424:ec00 standard microsystems corp.  bus 001 device 004: id 05e3:0608 genesys logic, inc. usb-2.0 4-port hub bus 001 device 005: id 0bda:8176 realtek semiconductor corp. rtl8188cus 802.11n wlan adapter bus 001 device 006: id 046d:c31c logitech, inc. keyboard k120 business
lsmod:

code: select all

module                  size  used cfg80211              462846  0  rfkill                 22347  2 cfg80211 bcm2708_wdog            3894  1  snd_bcm2835            21149  0  snd_pcm                90778  1 snd_bcm2835 snd_seq                61097  0  snd_seq_device          7209  1 snd_seq snd_timer              23007  2 snd_pcm,snd_seq snd                    66325  5 snd_bcm2835,snd_timer,snd_pcm,snd_seq,snd_seq_device evdev                  11000  2  joydev                  9766  0  8192cu                569561  0  uio_pdrv_genirq         3666  0  uio                     9897  1 uio_pdrv_genirq
if needs said, bought:
https://www.adafruit.com/products/814


going on here? chipset allegedly works out of box, doesn't seem case me. helpless out please. :)

ignore ioctl messages, occur different wifi adapters.

post you've used references old network configuration. new network set in latest raspbian mess , configuration you've used may problem.

don't have problems variety of adapters use don't used static ip's. latest version of raspbian i've set wifi adding following default wpa_supplicant.conf

code: select all

network={ 	ssid="network-name" 	psk="network-password" }

mrengman


raspberrypi



Comments

Popular posts from this blog

Connecting Raspberry Pi 2 to P10(1R)-V706 LED Dot Matrix - Raspberry Pi Forums

TypeError: <unknown> is not a numpy array - Raspberry Pi Forums

datso and removing imagetitle - Joomla! Forum - community, help and support