Arduino DUE-Based GPS / GLONASS Tracker with GSM/GPRS Modem and CAN-Bus

-

hello everyone,

there interesting 100% arduino compatible gps/glonass tracker project released indiegogo campaign:
https://www.indiegogo.com/projects/opentracker-v2-arm-based-gps-glonass-tracker-with-free-tracking-service/x/7923885



the board features same cpu arduino due, quectel m95 gsm/gprs modem, , quectel l76 gps/glonass module  can-bus interface , plenty of i/o access. also, free tracking service provided.



it's possible complete set cables, antenna, enclosure etc. start tracking device immediately, or alternatively it's possible board.



this great alternative trying pack these features various shields, , lot cheaper too.



the board alone gsm/gprs modem , can-bus offers great application possibilities like:

- vehicle tracking , fleet management.
- remote vehicle monitoring attached sensors.
- container tracking , monitoring sensors.
- geofencing sms alerts (get sms alerts when tracker leaves specified area).
- home alarm system sms alerts.
- gps logger
- can-bus logger
- sms gateway
- sms remote controller - gsm can/serial gateway (control machines sms commands).
- weather station sms notifications (using sensors).
- outdoor gps clock.

it's worth checking out campaign , see more details.

best,
marq



Arduino Forum > Development > Other Hardware Development > Arduino DUE-Based GPS / GLONASS Tracker with GSM/GPRS Modem and CAN-Bus


arduino

Comments

Post a Comment

Popular posts from this blog

Connecting Raspberry Pi 2 to P10(1R)-V706 LED Dot Matrix - Raspberry Pi Forums

-
Image
hello everyone, name kedi.. make system connecting raspberry pi 2 , arduino uno arduino adc of 1 dust sensor sharp gp2y1010au0f , 4 gas sensor. want show decision of air quality system in running text @ p10 16x32 led dot matrix display. in raspberry pi 2, connect p10 pins in gpio25, gpio12, gpio16, gpio13 & gpio26. now, i'm finish circuit , don't know must connect p10's vcc & ground (red & black wire). can me? , code in python controlling p10(1r)-v706 dot matrix?.. regards, kedi i can't python code (did mine in basic on risc os) regarding power, panels each require 2.5a, you'll need separate supply them. if attempted power them pi, pi's polyfuse blow immediately. alternatively, use supply capable of giving 10a supply both panels , pi. raspberrypi
Read more

TypeError: <unknown> is not a numpy array - Raspberry Pi Forums

-
hi, thank help. question simple: how convert raspistill data opencv processing. code: select all def capture(settings, width, height): command = "raspistill %s -w %s -h %s -t 200 -e bmp -n -o -" % (settings, width, height) imagedata = stringio.stringio() imagedata.write(subprocess.check_output(command, shell=true)) imagedata.seek(0) im = image.open(imagedata) buffer = im.load() imagedata.close() return im,buffer code: select all image1, buffer1 = capture(camerasettings, testwidth, testheight) cv2.imshow('image',image1) want use different opencv processing techniques, before need know doing wrong. bests svato raspberrypi
Read more

datso and removing imagetitle - Joomla! Forum - community, help and support

-
hello everybody i have installed datso v. 1.3.8 , remove imagetitles http://www.galleri-kbh.dk/index.php?opt ... ry&catid=2 on datsos  homepage there no names, can't find function in parameters in administration?? http://www.datso.fr/datsogallery/viewcategory/2.html can me. vh jan found way it  :d delete line 307 "$tle = ereg_replace('"', '', $row1->imgtitle);" in file components/com_datsogallery/datsogallery.php Board index Joomla! Older Version Support Joomla! 1.0 Extensions - 1.0.x Components
Read more