Downloading a sketch via a USB/Ethernet print server.
i trying access mega2650 on ethernet using usb print server. have tried several different models of type allows "any" usb peripheral, cameras, thumb drives, scanners, etc.. latest encore ennus1. when sending ordinary ascii data arduino usb port works perfect. can send characters arduino , receive appropriate response characters back. terminal program > win7 > pc > router > print server > arduino. if try download sketch using ide 1.5.5-r2 following error message:
sketch uses 28,498 bytes (11%) of program storage space. maximum 258,048 bytes.
global variables use 2,196 bytes (26%) of dynamic memory, leaving 5,996 bytes local variables. maximum 8,192 bytes.
avrdude: stk500v2_recv(): checksum error
avrdude: stk500v2_recv(): checksum error
avrdude: verification error, first mismatch @ byte 0x24db 0x92 != 0xff
avrdude: verification error; content mismatch
there no problem downloading same sketch via usb port. problem ide or arduino configuration? can do?
for radio emi reasons want separate ethernet converter mega board don't want use ethernet shield.
eeeeees
sketch uses 28,498 bytes (11%) of program storage space. maximum 258,048 bytes.
global variables use 2,196 bytes (26%) of dynamic memory, leaving 5,996 bytes local variables. maximum 8,192 bytes.
avrdude: stk500v2_recv(): checksum error
avrdude: stk500v2_recv(): checksum error
avrdude: verification error, first mismatch @ byte 0x24db 0x92 != 0xff
avrdude: verification error; content mismatch
there no problem downloading same sketch via usb port. problem ide or arduino configuration? can do?
for radio emi reasons want separate ethernet converter mega board don't want use ethernet shield.
eeeeees
Arduino Forum > Using Arduino > Networking, Protocols, and Devices (Moderator: fabioc84) > Downloading a sketch via a USB/Ethernet print server.
arduino
Comments
Post a Comment